-
Gauge Enable Function on the FINCH 5332E
What OFF Mode does
Turning the front-panel Gauge Enable switch off puts the FINCH 5332E into OFF Mode. The display and internal electronics stay powered, but the PTO function and all relay o...
-
The FINCH 5332E was the first external display developed by Titan Logix for use with the TD80 Guided Wave Radar transmitter.
-
Front Switch on the FINCH 5332E Display and CSA Certification
-
Home › Troubleshooting › Terminal Overfill › FINCH III Rack Control Functions
FINCH III Rack Control Functions
Built-in rack control, no separate RCM required
The FINCH III rack control functions replace the older RCM (R...
-
Model Number: TTEXT-RELAY
-
Clearing SPILL Alarm on a FINCH 5332E
Clear a stuck SPILL alarm
If a tank is unloaded while system power is off, the FINCH 5332E may display a flashing SPILL alarm when power is restored — the monitor detects a level change it inte...
-
If the FINCH 5332E display shows four dashes (----), this indicates a loss of communication between the Transmitter and the display.
-
FINCH 5332 Jumpers & Connections
Configuring the internal jumpers
The FINCH 5332 Internal Display contains several jumper settings that allow configuration of decimal point placement, onboard relay logic, FILL/FALL alarm operation,...
-
FINCH 5332E (Red Board) with Rack Interface Module P2000A (Photo Switch)
Overview
The FINCH 5332E (Red Board) was designed to work with Titan Logix's legacy Optical Rack Control product, the Rack Interface Module P2000A. It also in...
-
Updated Programming Converter Requirement for TD100 Updates through SensorLink
Summary of Issue
Over six years ago, Titan Logix introduced a newer version of the SV-RS232 Converter within our standard Program...