SensorLink · Driver Setup
How to Install the Keyspan USB Driver
The TD100 programming kit requires additional software or a driver to be installed before first use. A USB to RS232 Converter is included with the Titan-supplied programming kit, and its driver must be installed according to the manufacturer's instructions. An internet connection is required to download and install the correct COM Port driver.
The Legacy Keyspan USB to RS232 Converter
Manual driver installation is required. See SensorLink Help to download and install the driver for Windows 10.
Windows 11
For Windows 11, click the link below for USA-19HS installation instructions.
Keyspan USA-19HS Windows 11 Driver- Download the USA-19HS Windows 10, 11 driver.
- Unzip the downloaded file.
- See the unzipped README.txt file for installation instructions.
- Do not plug in the USB to RS232 Converter until prompted.
Before you start:
- Ensure your computer is connected to the internet.
- Do not plug in the USB to RS232 Converter until prompted.
Step-By-Step Installation Instructions for Windows 10
1 Open the Driver Help Page
- Open SensorLink.
- Select the TD100 programming page.
- Click File and then Help, or press F1.
2 Start the Driver Download
- On the left-hand side of the screen, click on COM Port Drivers.
- For the Keyspan USB-RS232 Converter, click the "here" link to start the driver download.
3 Save the Download
- Click on Save.
- Then click on Save.
- Then click on Close.
4 Run the Installer
- Double-click the downloaded filename: Windows-2008-Server-R2-7-8-8.1-and-10_v4.exe
5 Follow the Setup Wizard
- The splash screen is next to identifying the USA-19HS Converter.
- The Wizard begins. Follow each step in the Wizard.
- Ensure that the converter is unplugged from the PC.
- Click on Next.
6 Accept the License and Install
- Click on Yes to accept the terms of the license agreement.
- Then click on Next to begin the installation.
7 Finish the Installation
- Click on Cancel.
- Then click on Exit registration.
- Then click on Finish.
The COM Port driver installation is now complete.
