Import an STB File into SensorLink
Load a strapping table file into SensorLink and fine-tune the offset measurements so your TD100 transmitter reads tank levels accurately.
Import Process
Loading the Strapping Table
-
1
Open the TD100 Utility
Open the TD100 utility on your SensorLink software.
-
2
Open the File Menu
Click the File button to open the menu.
-
3
Import the File
Click Import File to select the appropriate strapping table file from your computer drive.
-
4
Select the File Format
Select the appropriate file (*.stb) format from your computer drive.
-
5
Open the Table
Click Open to view this table in SensorLink.
-
6
Edit if Needed
If you need to change anything in this file, click the Edit button to make changes.
-
7
Finish the Step
Click the Done button to finish this step.
Configuration
Offset Measurement
Ensure you update the offset measurement to your exact tank specifications for the compartment.
- Click the Offset Measurement button to edit offset measurement values.
- Insert the tank thickness and select the appropriate unit from the drop-down.
- Insert the probe offset and select the appropriate unit from the drop-down.
- Click OK to exit the offset measurement dialog box.
Final Steps
Other Changes
- Change alarm settings and optional settings as per installation requirements.
- Save your file to your computer if you made any changes to it.
Now you are ready to program your transmitter with these specifications.