FINCH III — Hardware Install
Short video walkthroughs covering key parts of a FINCH III install — from mounting the top fitting to wiring the transmitter. Jump to whichever step you need.
0:52
Installing 1" NPT Top Fitting and Anchor Cone
1:26
Route Wiring from Transmitter Down Tank
1:00
Installing the TD100 Transmitter
1:15
Connecting the Wire Kit to the TD100 Transmitter
1:20
Measuring & Cutting a Dual Rod Probe
1:22
Cutting and Measuring the ClearView Probe
FINCH III — Configuration
Short reference videos covering configuration for the FINCH III.
2:11
Initial Configuration with Titan Portal
8:50
Building a Strapping Table in Titan Portal
FINCH II — Hardware Install
Short video walkthroughs covering key parts of a FINCH II install — from mounting the top fitting to wiring the display. Jump to whichever step you need.
6:26
FINCH II Overview
3:07
Setting Fill and Fall Alarms on the FINCH II
2:24
Route Wiring to the FINCH II Display
0:49
Installing the FINCH II Display
1:17
Route Wiring to the FINCH II Display
0:37
FINCH II — Installing 1" NPT Top Fitting and Anchor Cone
0:25
Connecting to the FINCH II Display
0:37
FINCH II Boot Up Sequence
FINCH II — Configuration
Short reference videos covering configuration for the FINCH II.
1:40
SensorLink Programming and Configuring the TD100 System
0:51
Initial Configuration
1:13
Programming a TD100
0:54
Configure Alarm Relay Map
1:07
Manual Calibration of a TD100
0:17
Modifying Trailer Configuration
FINCH II — Test/Troubleshoot
Short reference videos covering testing and troubleshooting for the FINCH II.
0:41
System Diagnostics and Troubleshooting Tools
0:22
FINCH II Post-Installation Testing
2:06
E20 Error Code Troubleshooting on the FINCH II
2:52
802 Error Code Troubleshooting on the FINCH II