How to Update the Firmware on My Transmitter?
Keep your TD100 Transmitter running the latest firmware for optimal performance and functionality.
Overview
Before You Begin
New features for the TD100 Transmitter are implemented through firmware updates. To ensure optimal performance and functionality of your Titan system, it is essential to update to the latest firmware version whenever one becomes available.
Tip
Make sure you have a stable internet connection while using SensorLink. This connection is essential for downloading the latest firmware files. If prompted to update SensorLink upon launching the software, please accept the update to ensure you have the most current version.
Procedure
Using SensorLink
-
1
Launch SensorLink
Once the programming kit is connected to the transmitter and power is turned on, launch SensorLink. SensorLink may prompt you to update the app — accept the update.
-
2
Select TD100
On the left side of the screen, select TD100.
-
3
Open Firmware Upgrade
At the top of the screen, click Firmware Upgrade.
-
4
Load the Latest Firmware
Click the Select Latest Version button to load the latest firmware version.
-
5
Select the Com Port
Select the Com Port from the drop-down list. This is the USB connection from the programming kit to the computer.
Tip
Issues with your Com Port? See Having Issues Downloading My Com Port Driver.
-
6
Cycle the Power
The power to the transmitter needs to be turned off and then powered back on before you can continue. This process is different depending on how you are connected to the transmitter using your programming cables.
- Connected to the transmitter through the FINCH display? Cycle the power through the vehicle's battery power.
- Connected to the transmitter through the alligator clips directly connected to the transmitter? Press the black button on the programming cable.
-
7
Start the Upgrade
Click the Upgrade button from SensorLink. Ensure you click this button right after cycling the power to the transmitter.
The firmware upgrade progress is now shown from a green progress bar at the bottom of the screen.
Caution
Do not disconnect the power, unplug the programming kit, or close SensorLink while updating. Interrupting this update process can cause damage and/or corrupt the transmitter.
-
8
Finish Up
Once the update has been completed, you can disconnect the programming kit from the hardware and your computer. Click the Home button to return to the main TD100 Configuration screen.
