Create and upload a strapping table

1. Step 1

   Log into your Titan Portal account.

   

2. Step 2

   In the CORE menu, click Transmitter Configuration.

   

3. Step 3

   Click the New Strapping Table button.

   

4. Step 4

   Click Create from scratch.

   

5. Step 5

   Enter the new strapping table file name.

   

6. Step 6

   The 1^st entry of 0 depth and 0 volume have already been filled in. All strapping tables must begin with 0 and 0.

7. Step 7

   Enter the depth and volume values from the depth chart provided by the customer. Click the Add Row button to keep adding rows until all the values have been entered.

   

8. Step 8

   Set the Probe Type, Detection Mode, Depth Units and Volume Units. Click the Next button to continue.

   

9. Step 9

   Set or review the Spill alarm options and then enter HH alarm volume or depth. Click the right arrow next to Alarm Settings to continue.

   

10. Step 10

    Enter the Offset Measurement values for Tank Thickness and Probe Offset. Click the right arrow next to Offset Measurement to continue.

    

11. Step 11

    Set the Display Decimal and Decimal Shift if required. Click the right arrow next to FINCH Display Settings to continue.

    

12. Step 12

    Enter the Sump depth if required. Click the right arrow next to Sump Settings to continue.

    

13. Step 13

    Set the 4-20mA settings if required. Click the right arrow next to 4-20mA Settings to continue.

    

14. Step 14

    This screen confirms that all settings have been completed or reviewed. Click the Close button.

    

15. Step 15

    Click the Save button in the lower right corner of the screen to continue.

    

16. Step 16

    The newly created strapping table file is now in the list of files.