How to Configure Your FINCH II-6W Display
Complete the Mandatory Configuration Process
Before using your FINCH II-6W display, it is mandatory to complete the configuration process detailed below.
Using SensorLink
-
1
Launch SensorLink
Once the programming kit is connected to the FINCH II Display and power is turned on, launch SensorLink. SensorLink may prompt you to update the app — accept the update.
iTip
Refer to the FINCH II Display Configuration Overview for more on connecting your programming cables.
-
2
Select FINCH II
On the left side of the screen, select FINCH II.
-
3
Select the COM Port
Click the Select COM Port drop-down to select the USB connection connected to your computer.
Having Trouble?If you're having issues selecting the COM Port from the drop-down list, see this extra support article for help.
Configuration Settings
The configuration settings include:
- FINCH II Model Number
- Enable RCM
- Number of Compartments to Enable
- Alarm Relay Mapping
See Alarm Relay Mapping to learn more.
Note
Settings 1, 2, and 3 are only required when configuring the FINCH II-6W Display. They may be left blank for the FINCH II and FINCH II-W displays.
Configuration Setting Options
You can view a previously prepared configuration file, and also save the settings as a file for later use. This is useful for configuring a fleet of vehicles or for when the display has been replaced.
You can also view the current settings from the FINCH II Display if you've made specific changes inside SensorLink but want to go back to how it was configured previously. To get the current FINCH II Display configuration, click the Get Current Configuration button.
To set the FINCH II Display configuration back to the factory default settings, click the Set Defaults button.
To open a previously prepared configuration file, click File at the top of the screen, then click Open Configuration File and select the file.
Configuration settings can always be entered or modified manually.
Programming Your FINCH
-
1
Start Programming
Once the configuration has been set, click the Program button. This process is similar to programming the TD100 Transmitter.
-
2
Confirm the Overwrite
A window will pop up reminding you that the FINCH II configuration will be overwritten by continuing. Click OK to continue. A message is then shown indicating programming success or failure.
-
3
Disconnect the Programming Kit
Once the configuration has been completed, you can disconnect the programming kit from the FINCH display and your computer.
