-
Home › Troubleshooting › Configuration & Programming › Titan Portal & Titan Install Maintenance and Troubleshooting
Sending Log Files
Share Diagnostic Logs with Support
You can securely share recent...
-
Created On: 07/08/2026
in Troubleshooting Probes
ClearView Probe Installation
Titan Logix's probes are shipped longer than required to fit all tank installations. Our ClearView probes are 8 ft (96 in) long, and you will need to cut them down to fit inside your tank.
Compatible wi...
-
FINCH III: 2-6 Compartment System Configuration (Wiring Diagrams)
The images below show a visual of a 2 - 6 compartment system, that includes an external horn and solenoid operated valve installed on the tank. Our Titan Smart Junc...
-
FINCH III: 1 Compartment System Configuration (Wiring Diagrams)
The images below show a visual of a FINCH III 1 compartment system, that includes an external horn and solenoid operated valve installed on the tank.
*Click ...
-
Can I Check Hardware Configuration and Firmware Using T-Connect?
Yes — via the Support Page
T-Connect provides the capability to access device information. This feature is accessible through the Support page, fo...
-
Created On: 07/08/2026
in Troubleshooting Probes
Clearance Requirements for Probe and Transmitter Installations
The nature of Guided Wave RADAR requires a 4" minimum diameter around the probe to be free of metal. The probe must be mounted at least 2" away from any internal pipes, fi...
-
Resetting Alarm Relay Mapping to Factory Defaults (Front Panel)
Front Panel Button Sequence
There is a button sequence that can be entered on the front panel of the FINCH II that will reset the alarm relay mappi...
-
Home › Troubleshooting › Configuration & Programming › SensorLink
How to Create a Strapping Table in SensorLink
Overview
A strapping table is created by the tank manufacturer to translate the depth ...
-
Home › Troubleshooting › Configuration & Programming › SensorLink
Programming Kit Overview
Everything You Need to Program
The Titan-supplied programming kit provides all the cables required for programming...
-
Home › Troubleshooting › Configuration & Programming › SensorLink
How to Install the FTDI USB Driver
Driver Setup for the TD100 Programming Kit
The TD100 programming kit requires additional software ...