Resetting Alarm Relay Mapping to Factory Defaults (Front Panel)
Front Panel Button Sequence
There is a button sequence that can be entered on the front panel of the FINCH II that will reset the alarm relay mapping to factory default. This is extremely useful if you suspect that a customer has tampered with the relay mappings and the relays aren't working.
Reset Sequence
Button Sequence
Sequence
HORN BYPASS → UP ARROW → UP ARROW → COMP SELECT → HORN BYPASS
Requirement
The buttons must be pressed in that order and consecutive to each other for the command to be recognized.
!
Note
This feature is only available in firmware versions 1.03.00 and higher. Refer to Updating My Firmware for more info on these steps.