FINCH 5332E External Display Decimal Point Setting
Setting the Decimal Point
How to adjust the decimal point position on the FINCH 5332E external display.
Step-By-Step
Instructions
- Open the FINCH display enclosure by unscrewing the two screws securing the door.
- Let the door drop down.
- Turn on power to the system.
- On the door, see the circuit board.
- Find the row of pins along the lower left edge of the board.
- The black jumper sets the decimal point.
- Place the jumper across the sets of pins until the correct decimal point position is displayed. Moving the jumper right moves the decimal point left; moving the jumper left moves the decimal point right.
- Turn off power to the system.
- Close the enclosure and secure the door by tightening the two screws.