DISPLAY: FINCH 5332E (FINCH I)
      Back to home
      1. Titan Help Center
      2. Discontinued Products
      3. DISPLAY: FINCH 5332E (FINCH I)

      Finch 5332E External Display Decimal Point Setting

      Instructions

      1. Open the Finch display enclosure by unscrewing the two screws securing the door.
      2. Let the door drop down.
      3. Turn on power to the system.
      4. On the door, see the circuit board.
      5. Find the row of pins along the lower left edge of the board.
      6. The black jumper sets the decimal point.
      7. Place the jumper across the sets of pins until the correct decimal point position is displayed. Moving the jumper right moves the decimal point left. Moving the jumper left moves the decimal point right.
      8. Turn off power to the system.
      9. Close the enclosure and secure the door by tightening the two screws.