FINCH 5332 INT Display
      Back to home
      1. Titan Help Center
      2. Discontinued Products
      3. FINCH 5332 INT Display

      Finch 5332 In-Cab Display Decimal Point Setting

      Instructions

      1. Open the Finch display enclosure by removing the 2 x Philips screws holding the top and bottom halves of the display enclosure together.
      2. Turn on power to the system.
      3. See the circuit board with the decimal point pins and black jumpers facing up.
      4. Find the row of pins along the upper left edge of the board.
      5. The black jumper sets the decimal point.
      6. Place the jumper across the sets of pins until the correct decimal point position is displayed. Moving the jumper left moves the decimal point right. Moving the jumper right moves the decimal point left.
      7. Turn off power to the system.
      8. Reassemble the display and secure the display firmly in place.